Knowledge Base

	Carburetor and Fuel System
<< Back
Title: Linkert M75
*Description*: Is the M75 a good carb to run on a pan
*Author*: boddiley
panhead i have has a M75 linkert carb on it bike had not been started since 1987 i got it back in november took carb apart and cleaned and got it to run fair is the m 75 a good carb to run on a pan? Thanks Post by Cotten on Mar 10, 2005, 1:38pm I think the M75 was for a '41 Knuck, but can be made to service as well as any, if it is put in order. Inspect for throttleshaft slop, manifold flange warpage, daylight around the venturi, and a float that will float. Remedies are easy for these common ailments. The hard one is when the throttle disc has worn itself into the carb bore to the point where a groove extends all the way to the idle bleed holes: I commissioned oversize 9/X discs to be made for this repair; The groove is merely honed away to fit the disc. Post by boddiley on Mar 12, 2005, 3:32am thanks for the info
-- ^ ^ TOP ^^ --