WANTED:::: Need good used model 58 generator frame

Post by **RUBONE** » Sun Jul 16, 2017 10:31 pm

Hydra beat me to it!!

Post by **hydra74** » Sun Jul 16, 2017 10:35 pm

[Hydra beat me to it!!*]

Post by **RUBONE** » Sun Jul 16, 2017 10:40 pm

One other thing to think about..
The armature on a model 58 is different than a model 61, the shaft where it rides on the bushing is a different diameter than a needle bearing shaft. It is slight, but I was remembering last night that they differed and verified with the parts books. So care must be taken when swapping parts around. Very like the difference in Panhead cams for bushing in the crankcase or needle bearing, they differ. One of the bike reasons for cracked cases and spun bushings. Folks randomly replacing cams without properly sizing them.

Post by **hydra74** » Sun Jul 16, 2017 10:51 pm

Thanks, good to remember that the armature is different
I have the model 58 on my 55, it works fine

Hydra74

thepigstye · Post by **thepigstye** » Mon Jul 17, 2017 2:01 am

Thanks for the pic, that's a big help in looking for that part.

4pans1man · Post by **4pans1man** » Mon Jul 17, 2017 2:25 am

I have a complete Model 58 that I'd sell. I don't really need to trade. I have about a dozen spare generators and don't need another one. I can e-mail pics?
My old pc doesn't like loading on this site.

....Tony.

thepigstye · Post by **thepigstye** » Mon Jul 17, 2017 2:42 am

Sure thing. Email me at pigstye13@aol.com

The Panhead & Flathead Site

WANTED:::: Need good used model 58 generator frame

Re: WANTED:::: Need good used model 58 generator frame

Re: WANTED:::: Need good used model 58 generator frame

Re: WANTED:::: Need good used model 58 generator frame

Re: WANTED:::: Need good used model 58 generator frame

Re: WANTED:::: Need good used model 58 generator frame

Re: WANTED:::: Need good used model 58 generator frame

Re: WANTED:::: Need good used model 58 generator frame

Who is online