oil filter mount

Post Reply
jerryd
Posts: 119
Joined: Mon Jun 16, 2014 12:47 pm
Bikes: 58 FL, 74 Norton Commando, 70 T100R, 72 Yamaha 75, 65 Honda C65

oil filter mount

#1

Post by jerryd » Sat Oct 07, 2017 2:36 am

hi. I am looking for the mount # 63850-58A for the oil filter for a 1958 FL and two oil lines , the one from oil tank to pump and the one from the pump to the oil filter. I would use after market ones in any usable condition . I just want to get this bike running . Thanks, Jerry



Bigincher
Posts: 2780
Joined: Tue Dec 18, 2007 2:10 pm
Bikes: 1941/59 EL
1952 FL
1977 FLH
1994 Fatboy

Re: oil filter mount

#2

Post by Bigincher » Sat Oct 07, 2017 4:34 am

I think I have the bracket to mount the oil filter on a swingarm frame, the -58 part number. Send me a PM with email address, I'll send photos.
Dennis Corso makes the best aftermarket oil lines, they fit correctly without tweaking. Here's his Home Page, navigate from there.

https://www.denniscorso.com

If the cost is an issue, you can try eBay for used OEM oil lines, but even then you'll need to be able to visually recognize the correct ones for your bike.

Of course, maybe someone here can help you out, that would be great.

Andygears
Posts: 335
Joined: Tue Feb 05, 2013 12:25 am
Bikes: 1950 panhead, 1999 FLHTCI, 1987 FLHTC custom
Location: Daytona Beach

Re: oil filter mount

#3

Post by Andygears » Sat Oct 07, 2017 4:46 pm

I think I have the oil lines you need. I bought them used and they were swing arm but I needed rigid, they're chrome. I will get a picture tommorow and post.

I still need the two oil filter lines for rigid if anyone has them??

Andygears

58flh
Posts: 3336
Joined: Sat Jun 26, 2010 1:54 pm
Bikes: 1958flh 1969sporty,had a knuckle but sold back to original owner
Location: NEW JERSEY

Re: oil filter mount

#4

Post by 58flh » Sat Oct 14, 2017 1:45 pm

I have the arm /filter ,fittings ,but no lines--- It is a 80s aftermarket factory lookalike thats chromed---Respectfully---Richie

jerryd
Posts: 119
Joined: Mon Jun 16, 2014 12:47 pm
Bikes: 58 FL, 74 Norton Commando, 70 T100R, 72 Yamaha 75, 65 Honda C65

Re: oil filter mount

#5

Post by jerryd » Tue Dec 05, 2017 1:06 am

made what I need . will do til I find the real thing . Cost 1 hour and approx 8 inchs scrap 1/2 rod. thanks for the suggestions and help, Thanks to bigincher for the accurate measurements. Oh found the oil lines. Thanks all
20171203_151442.jpg
20171203_151100 (1).jpg
You do not have the required permissions to view the files attached to this post.

Buddhahoodvatoloco
Site sponsor
Site sponsor
Posts: 567
Joined: Wed Sep 07, 2016 7:13 pm
Bikes: 1969 FLF
1937 EL Sold
1949 rat bike Sold
1946 FL Sold
Location: san diego

Re: oil filter mount

#6

Post by Buddhahoodvatoloco » Tue Dec 05, 2017 2:04 am

Jerry, I'm impressed, good job. Necessity is "The Mother of Invention".
In closing that BigCincher hombre is solid Gold, helped me out awhile back.

Bigincher
Posts: 2780
Joined: Tue Dec 18, 2007 2:10 pm
Bikes: 1941/59 EL
1952 FL
1977 FLH
1994 Fatboy

Re: oil filter mount

#7

Post by Bigincher » Tue Dec 05, 2017 3:08 am

I'm totally impressed with your fabrication skills, Jerry.
I mean, look at that thing! It looks exactly like an OEM bracket!
I don't mind taking the time to make a good drawing when the results turn out so good. Nice work!
Vato, you're a solid hombre yourself, too!

George Greer
Site sponsor
Site sponsor
Posts: 1273
Joined: Wed Mar 24, 2010 5:48 am
Bikes: 1942 WLA Type III

Hybrid WL/KH bobber project.

58 FL, engine, frame swingarm, gas tanks.
Location: Markt Einersheim, Bavaria. and soon to be back in the US, Portland Oregon
Contact:

Re: oil filter mount

#8

Post by George Greer » Sat Dec 09, 2017 8:53 am

Nice!!

George

Post Reply

Return to “Parts Wanted”