Needed couple panhead valves

Post Reply
bigb
Posts: 14
Joined: Sat Apr 28, 2018 4:57 am
Bikes: 62 Harley Davidson
Location: SD

Needed couple panhead valves

#1

Post by bigb » Sun May 27, 2018 6:00 am

Hey ,would any you guys out there have a used intake and exhaust valves for a 74Panhead also need the springs and retainers,locks ,thanks for reading guys



RUBONE
Moderator
Posts: 5403
Joined: Sat Nov 15, 2008 4:09 am
Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
Has thanked: 40 times
Been thanked: 610 times

Re: Needed couple panhead valves

#2

Post by RUBONE » Sun May 27, 2018 1:37 pm

Why in the world would you want used valves??

bigb
Posts: 14
Joined: Sat Apr 28, 2018 4:57 am
Bikes: 62 Harley Davidson
Location: SD

Re: Needed couple panhead valves

#3

Post by bigb » Sun May 27, 2018 3:48 pm

thanks for the reply , I jusy need them for one head ,you see I got this bike ,or should isay most of it ,and for some reason the valves where missing on the one head, and with my buget if I could find a couple decsent ones it would be great

Panhead Ed
Posts: 348
Joined: Sat Jan 30, 2010 8:29 pm
Bikes: 1948 FL
1959 FLH chopper
1966 Norton P-11
1968 XLCH
1976 FXE
Location: N/W ohio
Has thanked: 3 times
Been thanked: 26 times

Re: Needed couple panhead valves

#4

Post by Panhead Ed » Sun Feb 10, 2019 4:06 pm

Sorry but thats just the sort of thing that causes un needed failure and then the bad rap about unreliable HDs and such when in fact the whole problem is created by an owner trying get by without spending a buck and wont accept the facts. I delt with this mindset back in the early 80s from guys who were more concerned about their beer and smokes over their bikes. Fixing it right the first time is cheaper in the long run... BUY SOME NEW VALVE AND GUIDES .

Andygears
Posts: 525
Joined: Tue Feb 05, 2013 12:25 am
Bikes: 1950 panhead, 1999 FLHTCI, 1987 FLHTC custom
Location: Daytona Beach
Has thanked: 18 times
Been thanked: 29 times

Re: Needed couple panhead valves

#5

Post by Andygears » Tue Feb 12, 2019 11:00 pm

I needed valves for my pan and found Manleys on Amazon for... I think $13 bucks each. If you can't swing that....?

Andgears

Post Reply

Return to “Parts Wanted”