65 to 69 e-start

Post Reply
blewcrab
Site sponsor
Site sponsor
Posts: 255
Joined: Mon Jul 09, 2012 11:08 pm
Bikes: 65FL and 2003 heritage
Location: Southern Maryland
Has thanked: 41 times
Been thanked: 19 times

65 to 69 e-start

#1

Post by blewcrab » Sun Mar 03, 2019 4:15 pm

I have a 65 that is kick only with a tin primary belt drive ….Im looking to add the e-start . it has the correct tranny so , I need inner and outer primary, starter , gear reduction housing / with gear ,shaft and internals , solenoid /with plunger etc. Im hoping someone has the whole shebang laying around.I can pay cash, or trade and cash . I have the repop tin primaries and complete belt drive assembly with a York diaphragm clutch , and the trans bearing support bracket for the 65 and up tranny



Bosheff
Posts: 1263
Joined: Fri Jul 03, 2009 8:23 pm
Bikes: 65 FLH 82 FLH
Location: Michigan
Been thanked: 54 times

Re: 65 to 69 e-start

#2

Post by Bosheff » Mon Mar 04, 2019 12:49 am

You are also going to need the correct clutch hub and associated clutch and compensator parts....bosheff

HACKSAW77
Posts: 3
Joined: Thu Apr 11, 2019 6:07 pm
Bikes: 1958 FL, 1988 FXST, 2000 FXSTS, 2016 FLTRXS
Location: Florida
Has thanked: 2 times

Re: 65 to 69 e-start

#3

Post by HACKSAW77 » Wed May 01, 2019 2:59 pm

blewcrab wrote:
Sun Mar 03, 2019 4:15 pm
I have a 65 that is kick only with a tin primary belt drive ….Im looking to add the e-start . it has the correct tranny so , I need inner and outer primary, starter , gear reduction housing / with gear ,shaft and internals , solenoid /with plunger etc. Im hoping someone has the whole shebang laying around.I can pay cash, or trade and cash . I have the repop tin primaries and complete belt drive assembly with a York diaphragm clutch , and the trans bearing support bracket for the 65 and up tranny
I am also looking for this setup.

Post Reply

Return to “Parts Wanted”