Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
5 posts • Page 1 of 1
- Posts: 570
- Joined: Mon Feb 23, 2009 5:24 am
- Bikes: 1946 WL
2000 FXD Dyna Superglide
2007 FXDB Street Bob
- Location: Snohomish, WA
Per a discussion on caimag.com, the torque spec for the transmission drive sprocket is way too high. The consensus seems to be that it should be 50 - 75 ft-lb.panhead wrote:OHV Big Twin torque specifications
- Site sponsor
- Posts: 10
- Joined: Sun Feb 09, 2014 12:04 pm
- Bikes: 1963 Harley FLH; 1974 BMW R90S
- Location: Pennsylvania
120 is way too high. My Genuine James trans sprocket Nut stripped out at about 90 ft-lbs. When I get the replacement nut I’ll stop at 80 ft-lbs. Also not gonna use the book “wack special wrench with a mallet “ method.