Transmission main drive gear

Knucklehead topics
Post Reply
Site sponsor
Site sponsor
Posts: 193
Joined: Mon Apr 09, 2012 7:38 pm
Bikes: '02 Fatboy, '47 Knuckle, '52Pan

Transmission main drive gear


Post by white1j0 » Mon Jun 12, 2017 8:15 pm

How far out through the trans main shaft oil seal should the main drive gear be sticking out, I have about 1/2", with my gear, oil deflecter and lock ring, I have less then 1/8" threads
001.JPG (223.32 KiB) Viewed 509 times

Posts: 1574
Joined: Wed Jul 07, 2010 4:28 am
Bikes: 1950Panhead
Location: USA

Re: Transmission main drive gear


Post by 1950Panhead » Tue Jun 13, 2017 1:16 am

Sprocket flange is .275", nut is .250", nut should be flush with gear.

Post Reply

Return to “Knucklehead”