55-64 primary "chain housing plug"?

Post Reply
Cormac22
Posts: 10
Joined: Mon Aug 13, 2012 9:53 pm
Bikes: 2000 Sportster
1996 FXDL
1948 Panhead

55-64 primary "chain housing plug"?

#1

Post by Cormac22 »

I have a '48 pan that evidently has a 55-64 primary cover. The issue is that there is a hole centered on the engine shaft that should probably have some sort of plug in it. The only places I have found them is on E-bay and http://WWW.jwboon.com" onclick="window.open(this.href);return false;. Anybody know of a supplier that isn't in Europe or that is selling the whole primary tin? I just need this plug...



RUBONE
Moderator
Posts: 6131
Joined: Sat Nov 15, 2008 4:09 am
Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
Has thanked: 117 times
Been thanked: 1142 times

Re: 55-64 primary "chain housing plug"?

#2

Post by RUBONE »

Are you sure it is a '55 up cover? If it is diamond type it is not. Lots of aftermarket compensator sprocket kits required drilling the cover for greasing the sprocket. Generic plugs are available at many hardware stores and auto parts stores.
Robbie

BudPounder
Posts: 10
Joined: Thu Jan 19, 2012 11:54 pm
Bikes: 06 FXDB 04 FLHTCUI 89FLHTCU

Re: 55-64 primary "chain housing plug"?

#3

Post by BudPounder »

48 should have inspection cover screws at 3 o'clock and 9 o'clock, later years after 49 are 12 o'clock and 6 o'clock.

Cormac22
Posts: 10
Joined: Mon Aug 13, 2012 9:53 pm
Bikes: 2000 Sportster
1996 FXDL
1948 Panhead

Re: 55-64 primary "chain housing plug"?

#4

Post by Cormac22 »

It looks like this one, the plug in question is the chrome bit.
You do not have the required permissions to view the files attached to this post.

1950Panhead
Posts: 1917
Joined: Wed Jul 07, 2010 4:28 am
Bikes: 1950Panhead
Location: USA
Been thanked: 216 times

Re: 55-64 primary "chain housing plug"?

#5

Post by 1950Panhead »

I have a '48 pan that evidently has a 55-64 primary cover.
Yep
That is an outer primary for a bike with a compensating sprocket.
Jerry

Cormac22
Posts: 10
Joined: Mon Aug 13, 2012 9:53 pm
Bikes: 2000 Sportster
1996 FXDL
1948 Panhead

Re: 55-64 primary "chain housing plug"?

#6

Post by Cormac22 »

Ok, now that I'm back on my home pc, here is the bike. In the background is my 96 Dyna, which has been nothing but trouble since day one. Once again, anyone know where I can source these plugs? Or if it is at ace hardware or something, where should I be looking in the store? Plumbing?
You do not have the required permissions to view the files attached to this post.

Lowbikemike
Posts: 241
Joined: Thu May 07, 2009 3:49 am
Bikes: 1962 FL
1987 FXSTC
1995 FLHR
Location: Columbia, IL
Has thanked: 2 times
Been thanked: 45 times

Re: 55-64 primary "chain housing plug"?

#7

Post by Lowbikemike »

Ace Hardware, Tractor Supply, Rural King, or any other hardware type store.

Look in the specialty parts section. Most of these stores will have a section of small drawers/containers of all sorts to small pieces that you never knew you needed. I don't know exactly what they are called but I would look for Chrome Plugs. It will have flexible teeth on the inside to hold it in and flat finish on the outside. If you have to have exactly the right part, the parts book says its 60650-54A

Lowbikemike
Posts: 241
Joined: Thu May 07, 2009 3:49 am
Bikes: 1962 FL
1987 FXSTC
1995 FLHR
Location: Columbia, IL
Has thanked: 2 times
Been thanked: 45 times

Re: 55-64 primary "chain housing plug"?

#8

Post by Lowbikemike »

And, if you want to sell that black primary cover you have pictured let me know.

jdpan
Posts: 461
Joined: Tue Sep 08, 2009 2:20 am
Bikes: 1952 Custom swingarm panhead
Location: Austin Tx.
Has thanked: 1 time
Been thanked: 19 times

Re: 55-64 primary "chain housing plug"?

#9

Post by jdpan »

What's the diameter of that hole, I might have a stainless plug that will work.

Cormac22
Posts: 10
Joined: Mon Aug 13, 2012 9:53 pm
Bikes: 2000 Sportster
1996 FXDL
1948 Panhead

Re: 55-64 primary "chain housing plug"?

#10

Post by Cormac22 »

Lowbikemike, I lifted that picture off of an ebay listing. It is still current as of today, auction "Original Harley NOS 1955 Panhead Transmission Outer Primary Cover" looks like the current bid is $199.

Jdpan, if I remember correctly the hole is 1.150". I'll double check after work, but I think that's what I calipered it at. Thanks.

nmaineron
Posts: 410
Joined: Sun Oct 17, 2010 1:00 am
Bikes: 1995 fxsts,1963 fl project in progress
Location: Patten,maine
Has thanked: 2 times
Been thanked: 34 times

Re: 55-64 primary "chain housing plug"?

#11

Post by nmaineron »

Those plugs are called knockouts in my neck of the woods and are used to fill open slots in electrical panels and boxes.Most any hardware or electrical supply house should have them.

Hog54
Posts: 820
Joined: Tue Aug 31, 2010 2:10 pm
Bikes: 1954 Panhead
1980 Lowrider
Has thanked: 2 times
Been thanked: 31 times

Re: 55-64 primary "chain housing plug"?

#12

Post by Hog54 »

Hand grip end plugs would almost work.Im almost positive they sell them at home depot or lowes too.

http://www.ebay.com/itm/Kool-Stop-Chrom ... 448wt_1208" onclick="window.open(this.href);return false;

awander
Site sponsor
Site sponsor
Posts: 1420
Joined: Fri Sep 21, 2007 3:03 am
Bikes: '52 FL
'64 FLH
Has thanked: 39 times
Been thanked: 132 times

Re: 55-64 primary "chain housing plug"?

#13

Post by awander »

Most knockout plugs for electrical boxes will typically be zinc-plated, and lots of them have a stepped profile. They don't look as nice as the slightly-domed chrome plugs.

VPH-D
Posts: 887
Joined: Tue Feb 01, 2005 1:00 am
Been thanked: 63 times

Re: 55-64 primary "chain housing plug"?

#14

Post by VPH-D »

I sold a half dozen or so of those plugs to Carl Olsen at Freemont this past February. Perhaps he'd sell one. For the cost, maybe a substitute would work.
VPH-D

awander
Site sponsor
Site sponsor
Posts: 1420
Joined: Fri Sep 21, 2007 3:03 am
Bikes: '52 FL
'64 FLH
Has thanked: 39 times
Been thanked: 132 times

Re: 55-64 primary "chain housing plug"?

#15

Post by awander »

I'm pretty sure a hardware store or Home Depot will have the nice chrome one to fit.

Post Reply

Return to “Chains & Belts”