58-84 Seat Post Install Tool

Post Reply
VintageTwin
Panhead Register Member
Posts: 776
Joined: Mon Aug 16, 2010 7:18 pm
Bikes: '46 Knuck. '57 Panhead, '59 Panhead
Location: Repop Hell
Been thanked: 1 time

58-84 Seat Post Install Tool

#1

Post by VintageTwin » Sat Feb 03, 2007 3:04 am

I see Colony made one. No. 2085-2 Heat treated tool to install top and lower bushings, complete with install-instructions.
They have the 58-84 bushings too No. 2084-2



Panacea
Posts: 1867
Joined: Fri May 24, 2002 1:00 am
Bikes: 64FL 99FLHR 01FXSTD
Location: Mpls. MN.
Has thanked: 14 times
Been thanked: 57 times

seat post bushing

#2

Post by Panacea » Sat Feb 03, 2007 5:47 am

I installed a new seat post bushing this winter as I am returning my 51 to a seat post. I was unaware there was a lower bushing, should I be looking at checking it's condition also? ahow far down the tube does it sit? Mike

VintageTwin
Panhead Register Member
Posts: 776
Joined: Mon Aug 16, 2010 7:18 pm
Bikes: '46 Knuck. '57 Panhead, '59 Panhead
Location: Repop Hell
Been thanked: 1 time

#3

Post by VintageTwin » Sat Feb 03, 2007 3:25 pm

Nope. Just for '58-64. '36-57 just has the one bushing at the top. Nice to see that mfgrs. are adding to their line of '36-64 parts.

piferck2010
Posts: 3
Joined: Sun Apr 08, 2018 9:07 pm
Bikes: 1959 duoglide
2013 ultra classic
Location: COLCORD,ok.

Re: 58-84 Seat Post Install Tool

#4

Post by piferck2010 » Tue Apr 10, 2018 3:45 pm

New to the site. Question . I am installing the bushings for my pogo stick. Never done this but it never had any and has alot of movement in the seat. Does the bushings press into the frame and the post slide up and down. Confusef. Sorry any help. Thanks
Chris

Post Reply

Return to “Seat”