any ideas what size and grade nuts and bolts

General topics
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
mikemacy
Posts: 6
Joined: Fri Feb 29, 2008 6:57 pm

any ideas what size and grade nuts and bolts

#1

Post by mikemacy » Thu Apr 03, 2008 1:54 pm

does anyone have any ideas on what size and grade nuts and bolts to use for mounting the motor and tranny to the frame? i received absolutely no mounting hardware and havent been able to find a kit for a 65 pan online. thank you all.
mike



fourthgear
Posts: 1362
Joined: Mon Apr 11, 2005 1:12 pm
Location: north florida

#2

Post by fourthgear » Thu Apr 03, 2008 4:08 pm

N.O.S. parts has all you need and even some Colony stuff.
http://www.nosparts.com/

51Hog
Posts: 655
Joined: Fri May 20, 2005 7:29 pm
Location: Wasilla, Alaska

#3

Post by 51Hog » Thu Apr 03, 2008 4:28 pm

I don't know about Motor mount bolts from Colony, but I just tried to install their rear stand bolt kit. It fits but it is so soft that I stripped one of the bolts, and one of the nuts. They felt like they were just compressing the split lock washer and the cupped large area flat washers. No I did not use a torque wrench. The nuts were snugged up using a 6 inch box end. Some of the other Colony bolt kits that I bought were great.

mikemacy
Posts: 6
Joined: Fri Feb 29, 2008 6:57 pm

#4

Post by mikemacy » Thu Apr 03, 2008 8:07 pm

awesome. thats a great place to buy from but i still dont know what size the bolts are supposed to be and what they should be made of. any ideas on size both length and diameter.
thank you again

panhead
Site Admin
Posts: 2439
Joined: Wed Dec 12, 2001 9:17 pm
Bikes: 1954 FL
Location: Holland

#5

Post by panhead » Thu Apr 03, 2008 9:02 pm

3/8"-24 x 2 5/8"

mikemacy
Posts: 6
Joined: Fri Feb 29, 2008 6:57 pm

#6

Post by mikemacy » Fri Apr 04, 2008 12:02 am

thank you very much panhead! same size to mount the tranny plate?

Cotten
Posts: 6788
Joined: Mon Aug 26, 2002 9:09 am
Location: Central Illinois

#7

Post by Cotten » Fri Apr 04, 2008 2:44 am

Colony is a very good hardware provider,
but you may also want to consider:
http://www.olddude.com/parts.htm

...Cotten

Buddhahoodvatoloco
Site sponsor
Site sponsor
Posts: 510
Joined: Wed Sep 07, 2016 7:13 pm
Bikes: 1969 FLF
1937 EL Sold
1949 rat bike Sold
1946 FL Sold
Location: san diego

Re: any ideas what size and grade nuts and bolts

#8

Post by Buddhahoodvatoloco » Wed May 24, 2017 12:39 am

Don't you just love the research, in then process of dialing in a 40 U. Trying to find the top motor mount bolt, it's a odd one.
Darn I thought I had a picture of it, it's crown is kinda beveled to sit in the throttle harness. Guess i am bordering on hijacking this post.

ultrapan
Posts: 46
Joined: Sat Feb 05, 2005 5:57 pm
Bikes: '64 FL,'42E,'03 Ultra Classic,
Location: Western, Oregon

Re: any ideas what size and grade nuts and bolts

#9

Post by ultrapan » Wed May 24, 2017 4:17 am

Colony numbers 8165-19 engine mount kit 36-69
9419-19 transmission mount kit 65- early 77

Bigincher
Posts: 2686
Joined: Tue Dec 18, 2007 2:10 pm
Bikes: 1941/59 EL
1952 FL
1977 FLH
1994 Fatboy

Re: any ideas what size and grade nuts and bolts

#10

Post by Bigincher » Wed May 24, 2017 5:42 am

Vato amigo, forget Colony. Call Old Dude, talk to Bart. He'll have everything you need, all the right stuff in the correct finish, be it cad or Park. When I call, I always have a list that I've generated from the Spare Parts catalog. But if you don't know the part number, just tell him what you need, he'll know.
He parkerizes stuff right there, so if you need something odd or different and want it park'd, he'll just do it for you. And he ships stuff out no later than the next day.

Colony fills a big void in the fastener market, but some of their stuff is better than other. Their kits often cover a wide range of years, which therefore overlook certain details; for instance, the motor mount nuts are crown nuts up until ... uh, 1950 I think, then they changed to cad plated flexloc nuts, which aren't in the kit. So those are the kinds of things to watch out for with Colony.

Personally, I always turn to Old Dude first. It's good stuff, it's the right stuff, and they know their business. But the cost of fasteners will add up fast. Imagine what it's like for someone like me, who needed basically ALL the correct fasteners on the entire ('52 FL) motorcycle. I've been buying them in small quantities for years, and I've spent hundreds and hundreds of dollars 'getting it right'. Imagine what it would be like without Old Dude and Colony. Hardware store nuts and bolts! Yikes!

Buddhahoodvatoloco
Site sponsor
Site sponsor
Posts: 510
Joined: Wed Sep 07, 2016 7:13 pm
Bikes: 1969 FLF
1937 EL Sold
1949 rat bike Sold
1946 FL Sold
Location: san diego

Re: any ideas what size and grade nuts and bolts

#11

Post by Buddhahoodvatoloco » Tue Jun 13, 2017 6:13 pm

Send me Old Guy, Dude link

panhead
Site Admin
Posts: 2439
Joined: Wed Dec 12, 2001 9:17 pm
Bikes: 1954 FL
Location: Holland

Re: any ideas what size and grade nuts and bolts

#12

Post by panhead » Tue Jun 13, 2017 6:33 pm


Bigincher
Posts: 2686
Joined: Tue Dec 18, 2007 2:10 pm
Bikes: 1941/59 EL
1952 FL
1977 FLH
1994 Fatboy

Re: any ideas what size and grade nuts and bolts

#13

Post by Bigincher » Wed Jun 14, 2017 2:09 am


Post Reply

Return to “General topics”