Cad Plating, where to get it done?

All other topics
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
Posts: 12
Joined: Fri Jul 23, 2010 3:43 pm
Bikes: 1946 U, Police bike
1960 Hardtail Bobber
Location: Hartland, WI.

Cad Plating, where to get it done?


Post by Service-Guy » Fri Oct 15, 2010 4:22 pm

I am rebuilding a Pan motor and need to find a shop that does Cad Plating. I'm looking for real Cad, not copy cad or zink. Any help?

Posts: 8
Joined: Sat Jul 14, 2007 8:34 pm
Bikes: 1953G,1958 FLH, 1960 FLH, 1964 FL, 1968 FLH, 1989 FLHS, 1997 FLHRI, 2016 FLHTKSE
Location: Mandeville, Louisiana

Re: Cad Plating, where to get it done?


Post by jtraub » Fri Oct 15, 2010 5:04 pm

I used S&H Chrome Plating & Powder Coating, 817 Madison Industrial Rd., Madison, TN 37115. Phone number is (615) 865-0100. Their website is" onclick=";return false;. They did the chrome and cadmium plating for me when I restored by 64 FL and they did a great job.

Posts: 1
Joined: Fri Oct 15, 2010 7:01 pm
Bikes: 1951 FL
1980 FLHS
Location: dousman, wi

Re: Cad Plating, where to get it done?


Post by cck1953 » Fri Oct 15, 2010 7:33 pm

Deluxe HD Restorations
130 Henry St
Dousman Wi 53118

We offer real cad plating for your restoration needs. Make sure your parts are as clean as you can get them. Bead blast is best, but even a soft wire brush works to get most of the gunk off. Dress the hex or slots on screws nut and bolts to remove any imperfections. If you are sending them in the mail or ups, lay them out and take a digital picture of them and send it to us or include it in the box. When we get them, we also take pictures before and after. We also offer Parkerizing and other restoration services.

Cass Kuzba
Deluxe HD Restorations

Posts: 2809
Joined: Tue Dec 18, 2007 2:10 pm
Bikes: 1941/59 EL
1952 FL
1977 FLH
1994 Fatboy
Has thanked: 21 times
Been thanked: 102 times

Re: Cad Plating, where to get it done?


Post by Bigincher » Sat Oct 16, 2010 1:57 am

That's good to know, I also have many parts for re-cadding and parkerizing. Cass, do you have any kind of pricing chart? PM me if you like...

Post Reply

Return to “General/Miscellaneous topics”