Mechanic in ontario Canada?

All other topics
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
jlj
Posts: 4
Joined: Sat Jul 14, 2007 5:57 pm

Mechanic in ontario Canada?

#1

Post by jlj » Thu Apr 21, 2011 12:39 am

can anyone suggest a mechanic who can work on pans in the toronto GtA area?
Thanks



speedking1949
Posts: 38
Joined: Sat Oct 25, 2008 6:37 pm
Bikes: 49 FL

Re: Mechanic in ontario Canada?

#2

Post by speedking1949 » Thu Apr 21, 2011 8:19 pm

I would suggest Mike Ryall at Kustom Bike Shop, if you don't mind the drive to Windsor:

http://www.kustombikeshop.com/" onclick="window.open(this.href);return false;

jlj
Posts: 4
Joined: Sat Jul 14, 2007 5:57 pm

Re: Mechanic in ontario Canada?

#3

Post by jlj » Thu Apr 21, 2011 10:37 pm

speedking1949 wrote:I would suggest Mike Ryall at Kustom Bike Shop, if you don't mind the drive to Windsor:

http://www.kustombikeshop.com/" onclick="window.open(this.href);return false;
Thanks but too far

jdpan
Posts: 460
Joined: Tue Sep 08, 2009 2:20 am
Bikes: 1952 Custom swingarm panhead
Location: Austin Tx.
Has thanked: 1 time
Been thanked: 19 times

Re: Mechanic in ontario Canada?

#4

Post by jdpan » Thu Apr 21, 2011 11:26 pm

jlj wrote:
speedking1949 wrote:I would suggest Mike Ryall at Kustom Bike Shop, if you don't mind the drive to Windsor:

http://www.kustombikeshop.com/" onclick="window.open(this.href);return false;
Thanks but too far
What all do you need done? There's a ton of experience right here on this forum. Maybe it's somethging you can do yourself with a little help??

jlj
Posts: 4
Joined: Sat Jul 14, 2007 5:57 pm

Re: Mechanic in ontario Canada?

#5

Post by jlj » Fri Apr 22, 2011 1:34 am

jdpan wrote:
jlj wrote:
speedking1949 wrote:I would suggest Mike Ryall at Kustom Bike Shop, if you don't mind the drive to Windsor:

http://www.kustombikeshop.com/" onclick="window.open(this.href);return false;
Thanks but too far
What all do you need done? There's a ton of experience right here on this forum. Maybe it's somethging you can do yourself with a little help??
True but I don't have the patience. It's tuning the carb and Mallory ignition to make kick starting easier. I do not want to mess around too much as it starts ok now and don't want to get it to far off the baseline. Also, the engine is an aftermarket pan with dual plugs,and I don't know what size the engine is or anything else about the cam,valves etc.

jdpan
Posts: 460
Joined: Tue Sep 08, 2009 2:20 am
Bikes: 1952 Custom swingarm panhead
Location: Austin Tx.
Has thanked: 1 time
Been thanked: 19 times

Re: Mechanic in ontario Canada?

#6

Post by jdpan » Fri Apr 22, 2011 1:57 am

Understood but, it's a real good idea to get to know your bike, especially for times when you're alone and broke down on the side of the road in the middle BFE without a cell phone. Your issues are very common and with a little time and effort could save yourself some hassle and maybe a few bucks, just sayin..

jlj
Posts: 4
Joined: Sat Jul 14, 2007 5:57 pm

Re: Mechanic in ontario Canada?

#7

Post by jlj » Fri Apr 22, 2011 2:32 am

jdpan wrote:Understood but, it's a real good idea to get to know your bike, especially for times when you're alone and broke down on the side of the road in the middle BFE without a cell phone. Your issues are very common and with a little time and effort could save yourself some hassle and maybe a few bucks, just sayin..
Agreed but first I need it set right and then keep it there

Post Reply

Return to “General/Miscellaneous topics”