Front brake rod 1952

Kickit · **Posted:** Thu Dec 21, 2006 1:48 am

I picked up one of Taiwan Teds brake rods and no way are the bends correct. Anyone have a drawing or a good rod that could give me the measurements?

King · **Joined:** Fri Apr 02, 2004 6:05 pm **Posts:** 174

Hi Kickit

Are you refering to the cable tube?

Kickit · **Posted:** Thu Dec 21, 2006 4:19 pm

Sorry, in my frustration I guess I wasn't very clear.
The brake rod for the back brake that connects to the brake pedal,
42326-37 foot pedal brake rod (front)

Thanks

King · **Joined:** Fri Apr 02, 2004 6:05 pm **Posts:** 174

Kickit

My usual go-to for such parts is NOS Parts but they do not appear to carry the rod. J&P cycles has it at $16.99 in chrome (certain to be Taiwan) and parkerized $21.99 (maybe US). They also carry the clevises if you need them. I would call first (1-800-397-4844) to find out who's their supplier so you don't get stuck again.

Good Luck

King

panhead · **Posted:** Thu Dec 21, 2006 8:23 pm

This picture is from the catalog of JWBoon:

panz4ever · **Joined:** Fri Aug 12, 2005 6:45 pm **Posts:** 338

Kickit, another possible source is Dennis Corsco Co in Ohio. The web address is denniscorso.com. The have it liste on page 3 of the rod section. The part number is 4073-37 (xref same as yours... 42326-37). Parkerized is 15/ chrome is 18.

The advertize saying all their parts are American made.

Kickit · **Posted:** Fri Dec 22, 2006 2:26 pm

Thanks Guys, the one I have that made me make this post was from J&P/ Taiwan Ted. I can make one if I can get the dimensions from a stock rod, all I would need is a tracing or a drawing with some good measurements. There has to be a stock rod somewhere.

The Panhead & Flathead Site

Forum rules

Front brake rod 1952

Who is online