The power to stop you

Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
dirtydistrict
Posts: 117
Joined: Tue Mar 16, 2004 11:00 am
Bikes: 2010 road king at the moment. Won't last long
Location: CORNAS FRANCE

The power to stop you

#1

Post by dirtydistrict » Tue Apr 29, 2003 11:12 pm

Hi guys, wish to retro fit my 58 duo for a 57 hydra but want to keep the juice rear brake drum; any experiment of this ??



59pan
Posts: 40
Joined: Fri Jul 13, 2007 10:11 am
Location: dallas

Re: The power to stop you

#2

Post by 59pan » Wed Apr 30, 2003 12:03 am

I had to weld a tab on the lower frame to accommodate the backing plate. Other than that no problems.

dirtydistrict
Posts: 117
Joined: Tue Mar 16, 2004 11:00 am
Bikes: 2010 road king at the moment. Won't last long
Location: CORNAS FRANCE

Re: The power to stop you

#3

Post by dirtydistrict » Wed Apr 30, 2003 7:38 am

Thanx 59, did you weld a small tab for the break line connection ?

59pan
Posts: 40
Joined: Fri Jul 13, 2007 10:11 am
Location: dallas

Re: The power to stop you

#4

Post by 59pan » Sat May 31, 2003 2:23 am

Sorry for the tardy reply. No just for the mounting of the backing plate stud. The hydraulic line lays between the frame and the plate. good luck. mine works well especially since I put a wilwood front disc on as well.

Post Reply

Return to “Brakes”