worn out brake lever stud 59 pan

Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
Posts: 11
Joined: Tue Sep 05, 2006 7:23 pm
Bikes: 1996 roadking/1959 panhead flh

worn out brake lever stud 59 pan


Post by daves59pan » Sun Mar 29, 2009 3:15 pm

:roll: i have a 59 pan and the rear foot brake lever lever stud is worn out does anybody have a fix for this (i was thinking about getting a oversized stud from colony and the recommended reamer) has any body run into this problem thanks

Posts: 1391
Joined: Mon Apr 11, 2005 1:12 pm
Location: north florida
Been thanked: 4 times

Re: worn out brake lever stud 59 pan


Post by fourthgear » Tue Mar 31, 2009 2:29 am

How about an over sized bushing for the lever & ream to fit the worn stud or get as you said a pin cut from stock and have it turned to the proper dia. and weld it in place ot the worn out one . I assume you are talking about the brake lever pivit pin in the forward controls. You can get a after market bracket also . ( V-twin ,JP Cycles etc. )

Post Reply

Return to “Brakes”