Kickstand fit with BDL Belt drive

Chassis, frame, instruments, fenders etc.
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
MS-Geek
Posts: 56
Joined: Sat Apr 09, 2011 2:10 am
Bikes: 1948 Panhead
Location: US-NY

Kickstand fit with BDL Belt drive

#1

Post by MS-Geek » Tue Oct 02, 2012 1:26 am

Hopefully a stupid question, I installed a belt drive and found that my kickstand now hits the belt. Anyone know of a kickstand that works with this setup?

picture attached
You do not have the required permissions to view the files attached to this post.



panbagger
Posts: 94
Joined: Mon Jun 29, 2009 12:57 am
Bikes: 52 panhead
Location: fowlerville,Michigan

Re: Kickstand fit with BDL Belt drive

#2

Post by panbagger » Tue Oct 02, 2012 2:05 am

It looks like you are missing the kickstand stop, that goes just below the nut on the kickstand arm. Here's a picture of the one I use, and you can adjust it to keep it away from the belt. Scott
You do not have the required permissions to view the files attached to this post.

58flh
Posts: 3338
Joined: Sat Jun 26, 2010 1:54 pm
Bikes: 1958flh 1969sporty,had a knuckle but sold back to original owner
Location: NEW JERSEY

Re: Kickstand fit with BDL Belt drive

#3

Post by 58flh » Tue Oct 02, 2012 11:54 am

MS-GEEK!--As panbagger said or you can change the shaft to a straight one!-As per my pics in the gallery!--Its the same thing you have ,just no spoon on the end to hit the belt!--(Panbagger would be the cheaper route to go!)--GOOD-LUCK--RICHIE 8)

panbagger
Posts: 94
Joined: Mon Jun 29, 2009 12:57 am
Bikes: 52 panhead
Location: fowlerville,Michigan

Re: Kickstand fit with BDL Belt drive

#4

Post by panbagger » Tue Oct 02, 2012 10:25 pm

The number under the picture is the J&P part number, and they are between 12 and 13 dollars....... cheap fix. Scott

Post Reply

Return to “Chassis, Frame & Instruments”