Problems with attachments solved: viewtopic.php?f=7&t=17433

Kick Stand

Post Reply
heath49036
Posts: 55
Joined: Tue Dec 11, 2012 11:30 pm
Bikes: 1958 Panhead motor in a wishbone frame.

Kick Stand

#1

Post by heath49036 » Sat Feb 02, 2013 4:50 pm

Does this site have any documentation on how the kickstand is assembled?



Bigincher
Posts: 2830
Joined: Tue Dec 18, 2007 2:10 pm
Bikes: 1941/59 EL
1952 FL
1977 FLH
1994 Fatboy

Re: Kick Stand

#2

Post by Bigincher » Sat Feb 02, 2013 5:01 pm

Here's a cut from the Spare Parts Catalog, which somewhat shows a schematic assembly. If you need more than this, don't hesitate to ask. I can take a few photos if needed.

viewtopic.php?f=68&t=4369" onclick="window.open(this.href);return false;

Scrap
Site sponsor
Site sponsor
Posts: 587
Joined: Fri Jul 03, 2009 7:07 am
Bikes: 1957 FL
1980 FLT
74 FXE
2017 road glide
1971 Bonneville
Location: Pawtucket

Re: Kick Stand

#3

Post by Scrap » Sat Feb 02, 2013 11:12 pm

heath49036 wrote:Does this site have any documentation on how the kickstand is assembled?
By he way, if you have trouble installing the spring, assemble it without the stop lever 50099-36. You can then install the spring, lever it into position and install the stop lever.

hplhd
Site sponsor
Site sponsor
Posts: 610
Joined: Sat Apr 30, 2005 7:16 pm
Bikes: 1998 heritage springer
Location: indiana, usa

Re: Kick Stand

#4

Post by hplhd » Sun Feb 03, 2013 8:34 am

Scrap wrote:
heath49036 wrote:Does this site have any documentation on how the kickstand is assembled?
By he way, if you have trouble installing the spring, assemble it without the stop lever 50099-36. You can then install the spring, lever it into position and install the stop lever.
i couldn't figure out a way to explain what you just did scrap without confusing the situation. i was afraid the next post would be about not being able to get the spring on. :x

Post Reply

Return to “Frame & Fittings”