Front Chain Guard Cover Gasket Question

Post Reply
keiser
Posts: 27
Joined: Thu Jul 12, 2007 2:18 pm

Front Chain Guard Cover Gasket Question

#1

Post by keiser » Sat Jul 19, 2008 2:00 am

Do I put any gasket sealer on the gasket in the primary tin cover to innner primary? I can't find anything in any manual, but since they just run oil out the bottom anyway, I can't see why you would use a gasket sealer.



Cotten
Posts: 6911
Joined: Mon Aug 26, 2002 9:09 am
Location: Central Illinois

#2

Post by Cotten » Sat Jul 19, 2008 2:48 am

Keiser!

The cork doesn't always like to stay put for assembly, so glueing it into the cover makes future maintenance a lot easier.

I usually grease the inner so the cork will come back off intact.

....Cotten

keiser
Posts: 27
Joined: Thu Jul 12, 2007 2:18 pm

#3

Post by keiser » Sat Jul 19, 2008 7:48 pm

What type of glue do you use or recommend? I don't want to use something that is near impossible to get out when it comes time to replace the gasket.

Post Reply

Return to “Fenders, Primary, Tanks & Paint”