2 holes for wiring on the left side of my fender ?

Post Reply
neilw
Site sponsor
Site sponsor
Posts: 247
Joined: Sat Dec 20, 2008 3:24 am
Bikes: 1995 Roadking(still brand new)
1991 HD springer
1959 pan (I'm reassembling)
Location: Calgary
Been thanked: 2 times

2 holes for wiring on the left side of my fender ?

#1

Post by neilw » Wed May 04, 2011 5:14 am

I have 2 holes on the left side of my rear fender right by the shock. They apear to be for the wiring.Since I'm going to be using sig lights I'm going to use them both , is there a gromet or anything that goes in these ? Being I have all new wiring with heavy cloth braided harness I'm thinking thats all the protection the wires get .Is this correct?
Neil



Panhead Ed
Posts: 346
Joined: Sat Jan 30, 2010 8:29 pm
Bikes: 1948 FL
1959 FLH chopper
1966 Norton P-11
1968 XLCH
1976 FXE
Location: N/W ohio
Has thanked: 3 times
Been thanked: 26 times

Re: 2 holes for wiring on the left side of my fender ?

#2

Post by Panhead Ed » Wed May 04, 2011 11:24 am

no grommet is correct the heavy cloth insulation is all they used .

UPSROD
Posts: 445
Joined: Sat Oct 10, 2009 6:18 pm
Bikes: 58 FLH 65 FLH 81 FXB 04 FLHRSI
Location: PACIFIC NORTHWEST
Has thanked: 1 time
Been thanked: 35 times

Re: 2 holes for wiring on the left side of my fender ?

#3

Post by UPSROD » Wed May 04, 2011 6:11 pm

The turn signals go through the front hole and the tail light through the rear.

neilw
Site sponsor
Site sponsor
Posts: 247
Joined: Sat Dec 20, 2008 3:24 am
Bikes: 1995 Roadking(still brand new)
1991 HD springer
1959 pan (I'm reassembling)
Location: Calgary
Been thanked: 2 times

Re: 2 holes for wiring on the left side of my fender ?

#4

Post by neilw » Thu May 05, 2011 2:29 am

Thanks guys .
Neil

Post Reply

Return to “Fenders, Primary, Tanks & Paint”