Rear fender holes

Post Reply
Posts: 1649
Joined: Wed Jul 07, 2010 4:28 am
Bikes: 1950Panhead
Location: USA
Been thanked: 123 times

Rear fender holes


Post by 1950Panhead » Wed Jul 06, 2011 6:40 pm

The fender with the sergeant stripes is a 49-50 and has the two holes above the embossment for the fender tip.
The fender with the tail light is a 51-54 and has three holes in the embossed area.
What are the three holes for?
You do not have the required permissions to view the files attached to this post.

Posts: 1243
Joined: Fri Jul 03, 2009 8:23 pm
Bikes: 65 FLH 82 FLH
Location: Michigan
Been thanked: 44 times

Re: Rear fender holes


Post by Bosheff » Wed Jul 06, 2011 8:20 pm


Posts: 5199
Joined: Sat Nov 15, 2008 4:09 am
Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
Has thanked: 17 times
Been thanked: 525 times

Re: Rear fender holes


Post by RUBONE » Wed Jul 06, 2011 8:28 pm

The one with three holes likely had an aftermarket fender tip on it. Lots of companies made them and several used three mounting holes. The one with two holes appears to be set up for the correct -48 part number fender tip. The bottom two here look like your pattern. They are from Comiskey.

Post Reply

Return to “Fenders, Primary, Tanks & Paint”