Problems with attachments solved: viewtopic.php?f=7&t=17433

Generator end regulator wiring

Electrical issues
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
Dougy
Posts: 6
Joined: Mon Aug 27, 2007 5:15 pm
Bikes: 1958 panhead chopper
Location: Scotland

Generator end regulator wiring

#1

Post by Dougy » Tue Sep 11, 2007 8:00 pm

where does the black with red end and the black wire on my generator end regulator go on my 2 brush generator thank you Doug. :(



fourthgear
Posts: 1390
Joined: Mon Apr 11, 2005 1:12 pm
Location: north florida

#2

Post by fourthgear » Wed Sep 12, 2007 9:44 pm

What make of regulator is it ? I am assuming it is an electronic version. Franks , Cycle Electric , etc. ?

Dougy
Posts: 6
Joined: Mon Aug 27, 2007 5:15 pm
Bikes: 1958 panhead chopper
Location: Scotland

#3

Post by Dougy » Thu Sep 13, 2007 7:33 am

It is a cycle electric genarator but when i got it at a sale the regulator and the genarator were not assembled,the when new it was bought as a complete unit.If have tried to find the cycle electric web site for info but cant find can you help me forthgear thanks Doug.

panhead
Site Admin
Posts: 2513
Joined: Wed Dec 12, 2001 9:17 pm
Bikes: 1954 FL
Location: Holland

#4

Post by panhead » Thu Sep 13, 2007 7:46 am


fourthgear
Posts: 1390
Joined: Mon Apr 11, 2005 1:12 pm
Location: north florida

#5

Post by fourthgear » Thu Sep 13, 2007 12:08 pm

My CE reg. has a brown wire going to the " A " term. on the Generator and a green wire going to the " F " term. on the Generator ( right out of the inst. booklet ). I don't know if you may have an older CE regulator or some thing that looks like one and is made by another manufacturer. Does it say its a CE regulator ? It will have the name on it some where . Below is a photo of my Franks reg. wiring . Did the CE websight help ?
http://www.hydra-glide.com/coppermine/d ... ?pos=-1185

Dougy

regulator end genarator

#6

Post by Dougy » Thu Sep 13, 2007 8:37 pm

The web site helped going by the site it is a DGV 5000 model, it still does not tell me whare the wires go, one must go on to one of the brush holder plates,iwill fax cycle electric to get some info thanks fourth gear Doug

Post Reply

Return to “Electrical”