Generator/regulator wiring

Electrical issues
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
gpp3442
Posts: 30
Joined: Sat Jul 14, 2007 3:22 pm

Generator/regulator wiring

#1

Post by gpp3442 » Wed Mar 05, 2008 2:23 pm

Description: Can someone help me with the wiring of a two brush generator to a bosch regualtor

Post by gpp3442 on Jun 3, 2006, 3:43pm

Gentlemen,
I've searched pasts posts and found some info, but would appreciate a detailed explanation,she (57)has been converted to 12 volt, can someone help me with the wiring of a two brush generator to a bosch regualtor, to ignition/battery, markings are F, A and a wire off the end cap. On the regulator the B+ goes to the battery?-or should it go to a post on the ignition? I am not electrically inclined as Kell well knows from pasts posts, so any help would be greatly appreciated.
Thanks,
George III

Post by Panhead on Jun 3, 2006, 5:12pm

http://www.hydra-glide.com/phpBB2/kb.ph ... icle&k=323

Post by panzr4ever on Jun 3, 2006, 5:34pm

Well if i have it right... should be as follows

A side of generator goes to D+ side of Bosch regulator
F side of generator goes to DF side " " "
D- side of Bosch goes to ground

B+ side on Bosch needs to go to +side of battery and to battery terminal on ignition switch

Post by gpp3442 on Jun 4, 2006, 2:47pm

Gentlemen,
Panhead thanks for the link.
panz4ever thank you for the explanation.
George



Post Reply

Return to “Electrical”