Electric Frank's Regulator with Generator Light

Electrical issues
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
Ripley/Fla
Ex-member
Posts: 103
Joined: Wed Nov 21, 2007 1:27 am

Electric Frank's Regulator with Generator Light

#1

Post by Ripley/Fla » Wed May 28, 2008 2:21 am

I searched the knowledge base and need some help. I bought a bike with a Cycle Electrics 12 volt 65 A generator. Mounted to it is the no longer made Electric Franks solid state regulator. One wire is run back to the ignition switch where it meets up with the battery positive lead. Is it possible to run the generator light with this set-up? The bike has hacked wiring; there is nothing there at this time. Thanks for any help.



mbskeam
Posts: 964
Joined: Tue Mar 16, 2004 5:52 am
Location: Sultan, WASH
Contact:

#2

Post by mbskeam » Wed May 28, 2008 3:39 am

yes, look at pic.....

Image

and also hook up your gen idiot light to the A terminal.

mbskeam

Ripley/Fla
Ex-member
Posts: 103
Joined: Wed Nov 21, 2007 1:27 am

#3

Post by Ripley/Fla » Fri May 30, 2008 3:26 am

mbskeam, sorry, I have been away. Thanks a lot for the info. I am always greatful for all the help you and others give.

Post Reply

Return to “Electrical”