Thanks for post feature available again: viewtopic.php?f=7&t=17581

Wire Harness Routing

Electrical issues
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
Hauula Pan
Posts: 402
Joined: Sun Dec 21, 2008 2:15 am
Bikes: 1952 FL
Location: California
Has thanked: 4 times
Been thanked: 30 times

Wire Harness Routing

#1

Post by Hauula Pan » Fri Jun 05, 2009 1:57 am

Does anyone have diagram, picture, or just a sketch or drawing that shows the proper routing for the wiring on a 49 or 52 pan? For several years I ran my own wiring but now have a complete reproduction harness. I know all the hook ups, I just need to know how it routes along the frame tubes. Thanks for any help on this. Oh I am using both the seat post T/B and the front fork T/B. Mostly concerned with routing from dash & ign. sw. to the T/B's. The segment I have that runs from the dash to the front fork T/B seems way too long.



john HD
Moderator
Posts: 3674
Joined: Sat Aug 20, 2005 7:24 pm
Bikes: '42 WLA X 2, '55FL, '93 Ultra Classic, '91 Fatboy, '97 883, '71 Suzuki Duster 125, '83 GPz 750.
Has thanked: 52 times
Been thanked: 77 times

Re: Wire Harness Routing

#2

Post by john HD » Fri Jun 05, 2009 2:14 am

haluua,

the harness makes a big u shaped bend around the neck and is held in place with clip.

the picture should explain alot...

john
You do not have the required permissions to view the files attached to this post.

Post Reply

Return to “Electrical”