Thanks for post feature available again: viewtopic.php?f=7&t=17581

65 A Field coils resistence

Electrical issues
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
48blackone
Posts: 24
Joined: Thu Mar 11, 2010 2:12 pm
Bikes: Pan head 1948 FL
Road King 1996 FLHR
Location: Germany

65 A Field coils resistence

#1

Post by 48blackone » Mon Aug 23, 2010 7:14 pm

Hallo, the resistence of the field coils on my 12 volts 65A generators measured between the two posts A and F is 5,3 ohm . Could somebody tell me if this is correct?
Thank you
Giovanni



steinauge
Posts: 521
Joined: Tue Feb 03, 2009 10:05 pm
Bikes: 1938U,1949FL,1961FL,1968XL,1979FL ,1958 FL, 1965 BMW,1975 Honda CB750
Been thanked: 9 times

Re: 65 A Field coils resistence

#2

Post by steinauge » Mon Aug 23, 2010 7:54 pm

IIRC it is 1 to 4 ohms.

NightShift
Posts: 532
Joined: Tue Apr 21, 2009 4:20 pm
Bikes: Two Schwinns, a Hercules, and a Hiawatha
Location: Underground in Illinois
Has thanked: 1 time

Re: 65 A Field coils resistence

#3

Post by NightShift » Mon Aug 23, 2010 8:43 pm

Dear Fellas,
The service manual says to read amperage, not resistance.

Hope this helps,

kell
Posts: 404
Joined: Sat Jun 19, 2004 2:58 am

Re: 65 A Field coils resistence

#4

Post by kell » Mon Aug 23, 2010 9:10 pm

Giovanni
That is the right resistance for the field coils.

48blackone
Posts: 24
Joined: Thu Mar 11, 2010 2:12 pm
Bikes: Pan head 1948 FL
Road King 1996 FLHR
Location: Germany

Re: 65 A Field coils resistence

#5

Post by 48blackone » Mon Aug 23, 2010 10:37 pm

Resistance (ohm ) = Volt/Ampere

Thank you Kell

NightShift
Posts: 532
Joined: Tue Apr 21, 2009 4:20 pm
Bikes: Two Schwinns, a Hercules, and a Hiawatha
Location: Underground in Illinois
Has thanked: 1 time

Re: 65 A Field coils resistence

#6

Post by NightShift » Tue Aug 24, 2010 1:18 am

Dear electrical engineers,
Maybe the service manual doesnt want you to overlook a potential problem.

An ohm meter doesn't always show a shorted armature either,

48blackone
Posts: 24
Joined: Thu Mar 11, 2010 2:12 pm
Bikes: Pan head 1948 FL
Road King 1996 FLHR
Location: Germany

Re: 65 A Field coils resistence

#7

Post by 48blackone » Tue Aug 24, 2010 7:05 am

Thank you Nightshift for your answer.
My 48 pan has a 12 v sistem now and the informations I have are only about 6 v sistems
Could you tell me how many Amperes should the field coils on a 65 A generators have and how can I connect battery and tester.
Bye
Giovanni

NightShift
Posts: 532
Joined: Tue Apr 21, 2009 4:20 pm
Bikes: Two Schwinns, a Hercules, and a Hiawatha
Location: Underground in Illinois
Has thanked: 1 time

Re: 65 A Field coils resistence

#8

Post by NightShift » Tue Aug 24, 2010 4:25 pm

Dear Giovanni,
Sorry this scan is hard to read, but it was fast.
FIELDTST.jpg
It is hard to find analog amp meters that are accurate that low.

Hope this helps,
You do not have the required permissions to view the files attached to this post.

48blackone
Posts: 24
Joined: Thu Mar 11, 2010 2:12 pm
Bikes: Pan head 1948 FL
Road King 1996 FLHR
Location: Germany

Re: 65 A Field coils resistence

#9

Post by 48blackone » Tue Aug 24, 2010 5:11 pm

I measured the amps as described using a batteries and an amp-meter in series i read 2,2 Amp, ohms are 5,3 so i think the fields are ok. I mounted the generator and I let it turn as an electric engine, F post and body to neg on battery, A post to pos on battery( battery 12 Volts , 45 A/h). It turn by itself an it use 4,2 amperes, when I try to stop the motor with my hand it use max 5.5 Amperes before nearly stopping. As this unit should develop 11 Amperes and the fields are ok I think the problem is on the Armature. I saw on the copper collector a damaged area , I ll buy a new Armature.

Thank you Night Shift for your reply

Bye
Giovanni

Post Reply

Return to “Electrical”