Leaky tranny stud

Transmission, clutch, chains and belts
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
haggis
Posts: 158
Joined: Fri Mar 19, 2004 3:35 am
Location: Maine USA

Leaky tranny stud

#1

Post by haggis » Sun May 29, 2005 11:40 pm

Hi guys,
Back left tranny mounting stud has basically stripped out >, tried the tape fix but cant get it to pull up enough. Can I Helicoil this without having to take the tranny out of the frame? Haggis



mbskeam
Posts: 964
Joined: Tue Mar 16, 2004 5:52 am
Location: Sultan, WASH
Contact:

Re: Leaky tranny stud

#2

Post by mbskeam » Mon May 30, 2005 1:13 am

hello,
they make a oversize studs, oem is....
3/8-16x3/8-24
over size are.....
7/16-14x3/8-24 and
1/2x13x3/8-24

these are about 15.00 set of 4

drain tranny, I bet you could run the tap right on in with out drilling it. coat the tap with grease as this will help trap the chips from taping.

but the mount plate might not let this happen.

mbskeam

Post Reply

Return to “Transmission, Clutch, Belt & Chains”