Trans sprockets

Transmission, clutch, chains and belts
Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
panwars
Posts: 58
Joined: Tue May 02, 2006 3:40 pm
Bikes: 61FL in a late 49 frame.
59FLH almost stock
Location: Wa state

Trans sprockets

#1

Post by panwars » Tue Apr 08, 2008 2:54 pm

Description: I need to know if anybody besides PBI makes sprockets for the 4spd

Post by panwars on May 31, 2004, 2:29am

I need to know if anybody besides PBI makes sprockets for the 4spd. I bought a 24 tooth to put on my new trans and jeesh, it just flops around on it like I can't believe. I pulled the old sprocket (bad teeth) off the old trans, and it fits the new trans snug, almost a tap on. It is an old Portco from the 70's, too bad they are out of business now. I am VERY un-impressed with the PBI. Movement on the splines radially allows about a 1/16 movement at the tooth back and forth, and the whole gear moves up and dowm on the shaft, that ought to work good eh????
I have scoured the net with no luck, J&P list a "less expensive alternative" Hell maybe that would be better, made in china or where-ever Thanks for the help.

Post by Cotten on May 31, 2004, 3:09am

If they are made in Italy, they ain't horrible.

Post by Mbskeam on May 31, 2004, 3:11am

hello, pbi? who they?
mbskeam

Post by panwars on May 31, 2004, 5:02pm

Where do I find Italian ones, or are you kidding Cotten? PBI is sold by Midwest, thru J&P and V-twin (Ted's) etc. All places I have looked carry PBI and no others. Where else can I look that may carry other brands? I need to get one a.s.a.p.

Post by fasted53 on Jun 1, 2004, 1:04am

panwars, I just put on a 24 tooth trans sprocket (pbi) and it fit fine. I got it from jp. May be you just got a faulty one?? Ed

Post by Cotten on Jun 1, 2004, 1:52am

Honestly, the ones made in Italy seem just fine.
For all I know, they may be the PBI you speak of. I'll have to check at the shop tomorrow.



Post Reply

Return to “Transmission, Clutch, Belt & Chains”