Tranny stud

Post Reply
fatfatboy
Posts: 100
Joined: Fri Jan 01, 2010 4:04 pm
Bikes: '03 Fatboy
'14 Slim
'60 FLH
86 XT 350
Location: St. Louis
Been thanked: 2 times

Tranny stud

#1

Post by fatfatboy » Thu Jan 21, 2010 5:52 am

Would any of you have an extra oversized bottom tranny stud for a panhead tranny?
I'm putting my tranny back together and one of my oversized studs threads are chewed up and the only way I can get them is in a set of four. Was hoping one of you guys might have one that I could purchase from you.

This is 3/8" to 1/2" mounting stud that mounts the plate to the tranny. Thanks.



ncitta
Posts: 56
Joined: Mon Jun 02, 2008 5:22 pm

Re: Tranny stud

#2

Post by ncitta » Thu Jan 21, 2010 10:13 pm

I might, I will look tonight.

fatfatboy
Posts: 100
Joined: Fri Jan 01, 2010 4:04 pm
Bikes: '03 Fatboy
'14 Slim
'60 FLH
86 XT 350
Location: St. Louis
Been thanked: 2 times

Re: Tranny stud

#3

Post by fatfatboy » Fri Jan 22, 2010 2:39 am

ncitta wrote:I might, I will look tonight.
Thanks ncitta. I appreciate your efforts.

ncitta
Posts: 56
Joined: Mon Jun 02, 2008 5:22 pm

Re: Tranny stud

#4

Post by ncitta » Fri Jan 22, 2010 4:34 pm

Did not find one, I will keep looking, I used only one out of the set I bought last year...

fatfatboy
Posts: 100
Joined: Fri Jan 01, 2010 4:04 pm
Bikes: '03 Fatboy
'14 Slim
'60 FLH
86 XT 350
Location: St. Louis
Been thanked: 2 times

Re: Tranny stud

#5

Post by fatfatboy » Sat Jan 23, 2010 4:18 am

Thanks ncitta. Thats what will happen if I have to buy a set. I'll pay $20-$30 for the set and then use one and then probably misplace the rest.
If thats what I have to do I will, but I just hate to waste the set.

Post Reply

Return to “Transmission, Starter & Shifting”