shifter prawl orientation

Post Reply
Posts: 9
Joined: Sun May 06, 2007 8:30 pm

shifter prawl orientation


Post by justdave » Mon May 10, 2010 7:06 pm

Hello all, I've got a box of pan and shovel ratchet top parts and am looking for any info on the orientation
of the shifter prawls in relation to the shifter prawl carrier because I'm looking at 4 prawls with 3 different slots.
Thanks DaveZ

Posts: 521
Joined: Tue Feb 03, 2009 10:05 pm
Bikes: 1938U,1949FL,1961FL,1968XL,1979FL ,1958 FL, 1965 BMW,1975 Honda CB750
Been thanked: 9 times

Re: shifter prawl orientation


Post by steinauge » Wed May 12, 2010 11:48 am

Are you talking about the groove in the shifter pawl? If so the square notches on the pawls both face in toward the center(toward each other).The groove registers on the pin in the pawl carrier so the pawls cannot rotate.

Post Reply

Return to “Transmission, Starter & Shifting”