Baker 6 in a 4 speed trans.

Post Reply
quangtri
Posts: 9
Joined: Wed Mar 26, 2008 10:53 am

Baker 6 in a 4 speed trans.

#1

Post by quangtri » Tue Jul 06, 2010 6:54 am

I'm thinking of putting one in my 60 duo-glide and would like to get some feed back, Thanks



Bosheff
Posts: 1244
Joined: Fri Jul 03, 2009 8:23 pm
Bikes: 65 FLH 82 FLH
Location: Michigan
Been thanked: 46 times

Re: Baker 6 in a 4 speed trans.

#2

Post by Bosheff » Tue Jul 06, 2010 12:40 pm

Be more specific. What are you hoping to gain?....bosheff

quangtri
Posts: 9
Joined: Wed Mar 26, 2008 10:53 am

Re: Baker 6 in a 4 speed trans.

#3

Post by quangtri » Tue Jul 06, 2010 11:45 pm

I am currently running a Rivera belt primary with 24T trans sprocket and the stock 51T hyd. brake drum on a stock 1960 DuoGlide. It runs 2800 rpm at 60 mph. I would like more mph (70) and not add a lot of rpm. 25 tooth is to big (being cautious) and if I change to disc brake and 48 tooth sprocket I think that my 2.66 first gear would be to tall to take off from a stop, so with a Baker 6 I could keep my stock rear drum with 51T, at least thats my thought, has anyone tried this ?

Post Reply

Return to “Transmission, Starter & Shifting”