exhaust nipple repair

Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
stroker
Posts: 17
Joined: Wed Apr 20, 2005 1:37 am
Bikes: 58 fl
Location: United States
Contact:
Contact stroker

exhaust nipple repair

#1

Post by stroker » Wed Jan 24, 2007 5:06 am

any advice on best way to repair broken and wore out exhaust nipples on 58 panheads ?


Top
fourthgear
Posts: 1392
Joined: Mon Apr 11, 2005 1:12 pm
Location: north florida
Been thanked: 4 times

#2

Post by fourthgear » Wed Jan 24, 2007 4:19 pm

stroker
They have weld in replacements , JP cycle part # 620-171 Kibblewhite Exhaust spigot for 48-65 Panhead, 7.99 each, Vtwin ,I'm sure has them too
Top
panz4ever
Posts: 522
Joined: Fri Aug 12, 2005 5:45 pm
Been thanked: 5 times

#3

Post by panz4ever » Wed Jan 24, 2007 10:21 pm

Stroker, if you want excellent quality work done, send em to HeadHog. He is definitely "the man" when it comes to old heads. He did mine and they are truely better than factory.
Top
Jack_Hester
Ex-member
Posts: 452
Joined: Sat Sep 18, 2004 7:21 pm
Location: Roxboro, NC, U.S.A.
Been thanked: 3 times
Contact:
Contact Jack_Hester

#4

Post by Jack_Hester » Thu Jan 25, 2007 12:07 am

I can vouch for HeadHog, too. I sent him a set of 48 heads, a good while back. He reworked the inlet nipples, and replaced the exhaust flanges. Both looked better than new. The exhaust flanges looked like original casting.

Jack
Top
stroker
Posts: 17
Joined: Wed Apr 20, 2005 1:37 am
Bikes: 58 fl
Location: United States
Contact:
Contact stroker

#5

Post by stroker » Thu Jan 25, 2007 3:13 am

THANKS evrey one think i will try the weld on. do the old ones need to be machind out or hand cut flush ? i will have local shop do the welding
Top
Post Reply

Return to “Exhaust”