STD Exhaust Gaskets

Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
Posts: 98
Joined: Sat Apr 14, 2007 12:37 am
Bikes: 93 CI Panhead from Accurate Eingineering Ridgid wishbone w/50's engineering
Location: LaVernia, Texas
Been thanked: 1 time

STD Exhaust Gaskets


Post by Eric » Tue Apr 21, 2009 2:09 am

Any one running STD heads with the three bolt flanges? If so, where can I get some gaskets been back ordered for 3 months!

Posts: 54
Joined: Thu Jun 26, 2008 4:02 am
Bikes: 1948 EL
1960 FL
2008 Buell 1125R
Location: florida

Re: STD Exhaust Gaskets


Post by wahoo » Tue Apr 21, 2009 2:34 am

Have you tried Paughco? 74HD2 is the part #

Posts: 48
Joined: Tue Nov 04, 2008 8:36 pm
Bikes: 2003Santee down & dirty
1981 shovel rigid
Location: Ingleside ,,Ontario
Been thanked: 1 time

Re: STD Exhaust Gaskets


Post by stroker93 » Wed Apr 22, 2009 6:28 pm

I made mine outta the black gasket material from Napa,,bout 1/8 thick..Make a paper design trace out,,,used a punch set for small holes and a holesaw for exhaust..I also RTV silicone coated them lightly on installation.

Post Reply

Return to “Exhaust”