I want a set of 40 inch duel Straights on My Pan and ?

Forum rules
Please do not start new topics here, but here: New Panhead and Flathead topics
Post Reply
Motorcyclemike
Posts: 222
Joined: Fri Apr 04, 2008 6:25 am
Bikes: Knucklehead and a Triumph
Location: North East Kansas

I want a set of 40 inch duel Straights on My Pan and ?

#1

Post by Motorcyclemike » Sat Sep 19, 2009 7:35 am

I have 2 inch over Fork tubes on My 1956FLH in a 1958 FLH Frame..... and i want to know IF any body has had a set of the Straights that are said to "Tuck UP under The Right Running Board"....i believe that Paucho sells a set like that.......i want to see a picture If you have one of that front pipes routing......then If i like it......i will order me a set !

The rear Paucho pipe routes close to the underside of the kicker spring , and the front pipe lays up close to it.

Thanks for all the help.



hplhd
Site sponsor
Site sponsor
Posts: 587
Joined: Sat Apr 30, 2005 7:16 pm
Bikes: 1998 heritage springer
Location: indiana, usa

Re: I want a set of 40 inch duel Straights on My Pan and ?

#2

Post by hplhd » Sat Sep 19, 2009 2:27 pm

mike, lemme try to post these. i took them this morning. they are the pipes your talking about in a drop seat frame(64) hope they help. hell, i hope i can post them.
64panandcheerleaderpicsoflittleb-5.jpg
64panandcheerleaderpicsoflittleb-5.jpg (27.7 KiB) Viewed 370 times
64panandcheerleaderpicsoflittleb-4.jpg
64panandcheerleaderpicsoflittleb-4.jpg (26.61 KiB) Viewed 370 times
64panandcheerleaderpicsoflittleb-2.jpg
64panandcheerleaderpicsoflittleb-2.jpg (25.64 KiB) Viewed 370 times
64panandcheerleaderpicsoflittlebits.jpg
64panandcheerleaderpicsoflittlebits.jpg (24.28 KiB) Viewed 370 times

Motorcyclemike
Posts: 222
Joined: Fri Apr 04, 2008 6:25 am
Bikes: Knucklehead and a Triumph
Location: North East Kansas

Re: I want a set of 40 inch duel Straights on My Pan and ?

#3

Post by Motorcyclemike » Sat Sep 19, 2009 6:06 pm

HplHd,

Wow that front pipe sure is tucked nicely "as close as it can be" Right ^UP^ Under that frame and running board too.....thats a really big change over the pipe that comes out of the front head and raps out around the front frame down tubes and is well below the frame thats parallel to the ground and at the very front of the back ward bend on the ones that don't tuck is Right where the Front Pipe will Scrape ground on a hard right turn"......Looks Like i will make a call and get a set ordered.
The picture i attached here is of the Front Pipe thats Dangerously LOW and will scrape_____ Ground ! on right turns , on the pipes "That Don't TUCK Neatly Under the Running Board !

HplHd.......the pictures were great....Thanks so much.
*Theirs No Head Like a Pan Head*

Suck-s q u e e z e-"BANG"-Blow*

Motor Cycle Mike
Attachments
PA100002.JPG
PA100002.JPG (145.76 KiB) Viewed 510 times

hplhd
Site sponsor
Site sponsor
Posts: 587
Joined: Sat Apr 30, 2005 7:16 pm
Bikes: 1998 heritage springer
Location: indiana, usa

Re: I want a set of 40 inch duel Straights on My Pan and ?

#4

Post by hplhd » Sat Sep 19, 2009 10:14 pm

i'm glad they helped you mike. they sound good to. never thought i'd ever do it but i gotta sell this pan.

Motorcyclemike
Posts: 222
Joined: Fri Apr 04, 2008 6:25 am
Bikes: Knucklehead and a Triumph
Location: North East Kansas

Re: I want a set of 40 inch duel Straights on My Pan and ?

#5

Post by Motorcyclemike » Fri Oct 02, 2009 8:06 am

Wow.....i got my 40 inch drags from Paucho yesterday and got them on......and they sure Do Sound Good......i added that 1/2 inch washer deal about 1 inch inside each pipe.....I can now "speed UP" really good Going Up hills here and i am running a 25 Tooth Counter Shaft Sproket.......its like a Intirely Different Motor with the duels......the jetting and S&S pump stroke did Not even need touched and the Idle Is Sooooo sweet !.........the power band is good low-mid-and high too......i have S&S duel plugged heads and points...it was a cold ride today......and i hated to shut that Pan Head down.
Suck-squeeze-BANG- B l o w !

Aint No Head...Like a Pan Head.

MotorCycleMike*
Attachments
Pans Exhaust Pipes (MD).jpg
Pans Exhaust Pipes (MD).jpg (81.67 KiB) Viewed 439 times

Post Reply

Return to “Exhaust”