Problems with attachments solved: viewtopic.php?f=7&t=17433

Spyke ignition on Panhead

All ignition related articles
Post Reply
two-feather

Spyke ignition on Panhead

#1

Post by two-feather » Mon Jan 07, 2008 7:30 am

Anyone with any experience getting the Spyke ignition to work with a pan?

This has been a complete PITA to get to work.



fourthgear
Posts: 1390
Joined: Mon Apr 11, 2005 1:12 pm
Location: north florida

#2

Post by fourthgear » Mon Jan 07, 2008 3:23 pm

Now that might depend on which Spike ign. you have . Some here are running them and should speak up . If you don't have the instruction sheet you can check there web sight or call them . What is the problem ? Won't start , running rough , no power ,etc.

Paughco
Posts: 11
Joined: Fri Jul 13, 2007 6:22 am
Bikes: 1950 H-D FL, 2016 BMW S1000XR
Location: Secret HQ in the Snoqualmie Valley

Spyke ignition on a pan

#3

Post by Paughco » Mon Jan 21, 2008 3:03 am

Hi guys:

My pan has a Spyke electronic ignition. It has always worked like a champ. Had to get a special coil.

The ignition is a Dual-fire Part # SPDFMSK. By "dual-fire" I mean the old-style that fires both cylinders each time the coil discharges.

Unfortunately I didn't install it, so I can't provide first-hand info. Toni Froehling of Sumner, WA installed it. He said it was very straightforward and went exactly as called out in the instructions.

Seeya
ATB

Post Reply

Return to “Ignition”