Dual point ignition

All ignition related articles
Post Reply
Posts: 36
Joined: Fri Jul 02, 2010 8:56 pm
Bikes: 1979 XLS
1961 FLH
Been thanked: 2 times

Dual point ignition


Post by panmarkski » Sat Jul 03, 2010 4:37 pm

Still running a dual point ignition in my 61 pan. Who makes a decent set of points for this setup?

Posts: 138
Joined: Wed Jul 29, 2009 2:54 pm
Bikes: 57 Pan, 42 WLA
Location: SW Florida
Been thanked: 4 times

Re: Dual point ignition


Post by Schwee » Tue Jul 06, 2010 2:41 pm

They are the same contact sets that are run in the single point, just two of 'em.

Early 50's Chevy points work. You 'might' need to widen the pivot hole a hair.
NAPA #CS779A or Bluestreak DR1823.

viewtopic.php?f=5&t=6404&start=15" onclick="window.open(this.href);return false;

Post Reply

Return to “Ignition”