Thanks for post feature available again: viewtopic.php?f=7&t=17581

65 glide slider seals

Information on forks/springers/shocks
Post Reply
Posts: 4
Joined: Sun Feb 13, 2011 2:38 am
Bikes: 65 fl
00 ultra
98 sporty

65 glide slider seals


Post by redpanhead » Sun Feb 13, 2011 5:09 pm

how difficult is to remove these, and am I going to need a press to re-install
Manual say's pry out , but I'm not sure that will work they seem to be in there pretty good

Posts: 1231
Joined: Fri Jul 03, 2009 8:23 pm
Bikes: 65 FLH 82 FLH
Location: Michigan
Been thanked: 40 times

Re: 65 glide slider seals


Post by Bosheff » Sun Feb 13, 2011 6:00 pm

Remove ret. clips and work the seal out. No big deal. No press needed to install new pieces....bosheff

Posts: 2830
Joined: Tue Dec 18, 2007 2:10 pm
Bikes: 1941/59 EL
1952 FL
1977 FLH
1994 Fatboy
Has thanked: 21 times
Been thanked: 100 times

Re: 65 glide slider seals


Post by Bigincher » Sun Feb 13, 2011 6:24 pm

You can buy a seal removal tool at any good auto parts store, such as NAPA. Something like this: ... 0117880229" onclick=";return false;

Use care when prying on the edge of the fork slider, protecting it from little nicks caused by the edge of the tool.

Post Reply

Return to “Forks/Shocks”