Push Rods On Pan

Top End (cylinders and heads)
Post Reply
Posts: 32
Joined: Sat Aug 21, 2004 9:52 pm
Location: Massachusetts

Push Rods On Pan


Post by bonham3 » Thu Jun 16, 2005 2:16 am

Back again. This is probably a no brainer but???:)
Something i just noticed after a year of adjusting my lifters (solids)
I was cleaning up the PR tubes and Rods and noticed 1 of the rods is
about 3/8" longer than the other three. This is on my 48 61" Pan.
??? Bike ran pretty good all that time and had no trouble setting the
valves. What gives? Normal ???

Bonham3 Ron L.

Posts: 977
Joined: Tue Mar 16, 2004 5:52 am
Location: Sultan, WASH


Post by mbskeam » Thu Jun 16, 2005 5:42 am

long one is the front exh.

Site sponsor
Site sponsor
Posts: 632
Joined: Wed Sep 07, 2016 7:13 pm
Bikes: 1969 FLF
1937 EL Sold
1949 rat bike Sold
1946 FL Sold
Location: san diego

Re: Push Rods On Pan


Post by Buddhahoodvatoloco » Fri Sep 09, 2016 1:31 am

Exactly, the longer one is for the front exhaust, those are probably SS lifters.

Post Reply

Return to “Top End / Cylinders”