65 panhead main drive gear

Gear Case (cams, idlers, cam cover)
Post Reply
vipersniper
Posts: 64
Joined: Wed Feb 20, 2013 6:22 pm
Bikes: 1994 Fatboy
1965 Panhead

65 panhead main drive gear

#1

Post by vipersniper » Sun Apr 28, 2013 5:29 pm

Is there suppose to be a oil deflector on the main drive gear on a 1965 panhead? I am replacing the seal and there is not a deflector when I took it apart and was wondering if 65's had one or did they only have them in 64 and earlier?
thankyou
VS



Cotten
Posts: 6911
Joined: Mon Aug 26, 2002 9:09 am
Location: Central Illinois
Has thanked: 100 times
Been thanked: 268 times

Re: 65 panhead main drive gear

#2

Post by Cotten » Sun Apr 28, 2013 5:55 pm

Good question, VS!

The parts catalog lists it for '39 through '69, however I do not believe it will fit with an aluminum primary.
Its purpose is to spray oil from the end of the gear into a tin primary.

....Cotten

vipersniper
Posts: 64
Joined: Wed Feb 20, 2013 6:22 pm
Bikes: 1994 Fatboy
1965 Panhead

Re: 65 panhead main drive gear

#3

Post by vipersniper » Mon Apr 29, 2013 1:03 am

Cotten wrote:Good question, VS!

The parts catalog lists it for '39 through '69, however I do not believe it will fit with an aluminum primary.
Its purpose is to spray oil from the end of the gear into a tin primary.

....Cotten
that my my issue as well I saw it in the parts book and I didn'y have one and thought I needed one
thankyou again

58flh
Posts: 3339
Joined: Sat Jun 26, 2010 1:54 pm
Bikes: 1958flh 1969sporty,had a knuckle but sold back to original owner
Location: NEW JERSEY
Has thanked: 195 times
Been thanked: 259 times

Re: 65 panhead main drive gear

#4

Post by 58flh » Mon Apr 29, 2013 1:32 pm

VIPERSNIPER---no slinger on Electragide-1965!---Richie

Post Reply

Return to “Gear Case / Cams”