Does anyone know correct thread size for rear brake actuating lever? One book says 5/32"-32 thread, and I bought colony pack and it says 5/16-3/, I need to buy tap and re-thread but I'm unsure which is correct. I have old and new fittings.
Grease fitting on seat post is bigger then 5/16, possibly 3/8? It doesn't look likes it's been altered but I'm not sure of that size either or if they had used any size?
My clutch lever has a hole but no threads between rivets, is it possible all didn't come with a fitting?
Thanks for any and all the help
Grease fittings, 1945,45" wl
Thread size, missing threads?
-
- Posts: 60
- Joined: Thu Dec 17, 2015 12:02 pm
- Bikes: Hummer, flathead
- Location: New york
-
- Posts: 60
- Joined: Thu Dec 17, 2015 12:02 pm
- Bikes: Hummer, flathead
- Location: New york
-
- Panhead Register Member
- Posts: 325
- Joined: Sun Sep 24, 2006 9:04 am
- Location: "Big Timber Country" Western Canada
- Has thanked: 1 time
- Been thanked: 3 times
Grease fittings,Flathead Panhead
[quote=RUBONE post_id=120089 time=1522070676 user_id=2188]
All the standard grease fittings are 5/16-32, a special thread.
[/quote]
Does anyone reproduce the # 9852 grease fitting 67.5 degree and also the 9853 90 degree grease fittings. Old dude only shows the 9851 fitting straight only. All these fitting are special thread 5/16-32. used on Har-Dav 1938-65 aprox. Horbor Vintage shows nothing I can find. Thanks in advance.... Joe
All the standard grease fittings are 5/16-32, a special thread.
[/quote]
Does anyone reproduce the # 9852 grease fitting 67.5 degree and also the 9853 90 degree grease fittings. Old dude only shows the 9851 fitting straight only. All these fitting are special thread 5/16-32. used on Har-Dav 1938-65 aprox. Horbor Vintage shows nothing I can find. Thanks in advance.... Joe
-
- Site sponsor
- Posts: 1543
- Joined: Wed Mar 24, 2010 5:48 am
- Bikes: 1942 WLA Type III
Hybrid WL/KH bobber project.
58 FL - Location: Markt Einersheim, Bayern
- Has thanked: 408 times
- Been thanked: 93 times
- Contact:
Re: Grease fittings, 1945,45" wl
Joe,
Get in touch with Kurt or Wendy at:
http://www.flatlandmotorcyclecompany.com/default.asp
Colony Kit number's:
2859-6 Chrome
2860-6 Cad
2861-6 Parkerized
Each pack has 6ea. in the kit.
George
Get in touch with Kurt or Wendy at:
http://www.flatlandmotorcyclecompany.com/default.asp
Colony Kit number's:
2859-6 Chrome
2860-6 Cad
2861-6 Parkerized
Each pack has 6ea. in the kit.
George
-
- Site sponsor
- Posts: 1543
- Joined: Wed Mar 24, 2010 5:48 am
- Bikes: 1942 WLA Type III
Hybrid WL/KH bobber project.
58 FL - Location: Markt Einersheim, Bayern
- Has thanked: 408 times
- Been thanked: 93 times
- Contact:
Re: Grease fittings, 1945,45" wl
Joe,
The 90 degree ones are also in Colony kits.
2856-6 Chrome
2857-6 Cad
2858-6 Parkerized.
George
The 90 degree ones are also in Colony kits.
2856-6 Chrome
2857-6 Cad
2858-6 Parkerized.
George