Thanks for post feature available again: viewtopic.php?f=7&t=17581

Can I use 35065-65B Main Drive gear in a 1952 transmission?

All Panhead related topics
Post Reply
awander
Site sponsor
Site sponsor
Posts: 1209
Joined: Fri Sep 21, 2007 3:03 am
Bikes: '52 FL
'64 FLH
Has thanked: 2 times
Been thanked: 53 times

Can I use 35065-65B Main Drive gear in a 1952 transmission?

#1

Post by awander » Sat Aug 04, 2018 10:46 pm

I have been reading and I see that the later part has an oil seal in it. Will the 65 part work in my '51 tranny without changing any other parts?



Robert Luland
Posts: 898
Joined: Sun Sep 02, 2007 7:56 pm
Bikes: 1922JD, 1937 ULH, 1946FL 1948FL, 1957FL, 1960FLH, 1965XLCH, 1995 FLHT
Location: Hoboken, NJ
Been thanked: 36 times
Contact:

Re: Can I use 35065-65B Main Drive gear in a 1952 transmission?

#2

Post by Robert Luland » Sun Aug 05, 2018 12:25 am

Yes it will. The only difference is that the end is machined for the seal and the bushing is shorter. Your not going to find an older one. I'm partial to the Andrews gear. Comes with the bushing pre installed. Bob L

awander
Site sponsor
Site sponsor
Posts: 1209
Joined: Fri Sep 21, 2007 3:03 am
Bikes: '52 FL
'64 FLH
Has thanked: 2 times
Been thanked: 53 times

Re: Can I use 35065-65B Main Drive gear in a 1952 transmission?

#3

Post by awander » Sun Aug 05, 2018 12:57 am

Thanks, Bob-I went with a used gear off ebay.

I just ordered some other parts from you...

Post Reply

Return to “Panhead”