55 FLH inner primary torque spec

All Panhead related topics
Post Reply
gwyld714
Site sponsor
Site sponsor
Posts: 26
Joined: Tue Oct 01, 2019 12:46 am
Bikes: 1955 FLH 2000 XLH
Location: Columbus OH
Has thanked: 1 time
Been thanked: 4 times

55 FLH inner primary torque spec

#1

Post by gwyld714 »

Happy late Thanksgiving. I can't seem to find the inner primary to engine torque specs for the front 3 bolts.



RUBONE
Moderator
Posts: 6269
Joined: Sat Nov 15, 2008 4:09 am
Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
Has thanked: 139 times
Been thanked: 1329 times

Re: 55 FLH inner primary torque spec

#2

Post by RUBONE »

That is because H-D never posted torque specs during the Panhead era. Use a standard torque chart (make sure it relates to aluminum) if you feel the need to have a number. Or use a number for a late Shovelhead, same thread size and pitch into the same material.

gwyld714
Site sponsor
Site sponsor
Posts: 26
Joined: Tue Oct 01, 2019 12:46 am
Bikes: 1955 FLH 2000 XLH
Location: Columbus OH
Has thanked: 1 time
Been thanked: 4 times

Re: 55 FLH inner primary torque spec

#3

Post by gwyld714 »

Thanks Rubone I came up with 12 ftlbs.

RUBONE
Moderator
Posts: 6269
Joined: Sat Nov 15, 2008 4:09 am
Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
Has thanked: 139 times
Been thanked: 1329 times

Re: 55 FLH inner primary torque spec

#4

Post by RUBONE »

gwyld714 wrote:
Sun Dec 01, 2019 6:09 pm
Thanks Rubone I came up with 12 ftlbs.
Be sure to Loctite(blue) or use the factory tab lock on the bolts.

Post Reply

Return to “Panhead”