WLA technical information

Great information on WLA details

All flathead topics
Post Reply
DCoul
Posts: 37
Joined: Mon Jan 25, 2016 10:01 pm
Bikes: 1942 WLA, 2014 FLHTK, 2018 KTM 690 Enduro, 2009 Vespa GT 200 (does that count?) : )
Location: Napa, CA
Been thanked: 3 times

WLA technical information

#1

Post by DCoul »

I stumbled across this technical manual for the WLA. The illustrations and explanations are the best I have seen. Wish I had found this a lot earlier.

https://www.gutenberg.org/files/51058/5 ... htm#fig_64



RUBONE
Moderator
Posts: 6276
Joined: Sat Nov 15, 2008 4:09 am
Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
Has thanked: 139 times
Been thanked: 1338 times

Re: WLA technical information

#2

Post by RUBONE »

That manual is in the documentation section of this forum, and has been for some time.

Buddhahoodvatoloco
Site sponsor
Site sponsor
Posts: 1589
Joined: Wed Sep 07, 2016 7:13 pm
Bikes: 1969 FLF
1937 EL
1940 U
Location: san diego
Has thanked: 771 times
Been thanked: 128 times

Re: WLA technical information

#3

Post by Buddhahoodvatoloco »

Play Nice.. :roll: :lol: :roll:
RUBONE wrote:
Wed Apr 29, 2020 1:56 am
That manual is in the documentation section of this forum, and has been for some time.

DCoul
Posts: 37
Joined: Mon Jan 25, 2016 10:01 pm
Bikes: 1942 WLA, 2014 FLHTK, 2018 KTM 690 Enduro, 2009 Vespa GT 200 (does that count?) : )
Location: Napa, CA
Been thanked: 3 times

Re: WLA technical information

#4

Post by DCoul »

I guess if it had a different name I would have looked at it.

RUBONE
Moderator
Posts: 6276
Joined: Sat Nov 15, 2008 4:09 am
Bikes: Multiple H-D, Ducati, BMW, Triumph, BSA,...
Has thanked: 139 times
Been thanked: 1338 times

Re: WLA technical information

#5

Post by RUBONE »

DCoul wrote:
Tue Jun 30, 2020 12:20 am
I guess if it had a different name I would have looked at it.
Why would it need a different name? Pretty easy to see it.

45Brit2017
Posts: 17
Joined: Wed May 09, 2018 6:28 am
Bikes: 1992 XL, 1943 WLC, 1978 XLCH
Location: England
Has thanked: 2 times
Been thanked: 5 times

Re: WLA technical information

#6

Post by 45Brit2017 »

I’ve had it as a paper copy for many years, excellent document.

Only H-D would print THIS in a manual .... “d. Install Exhaust Pipes.
(1) Position exhaust pipe (front and rear) assembly, working it into position so that front pipe end slips into cylinder port; then, pry and force rear pipe end into rear cylinder port.”

Post Reply

Return to “Flathead and Servi-Car”